Provide the best powder coating system solution
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Powder coating line

Hebei-Hanna-Powder-Coating-Equipment-Technology-Co,Ltd
Powder coating system manufacturer
You are here: Home » Service » News » Company News
  • Jul
    05
    The Difference Between Powder Coating and Paint Spraying

    Spray paint and powder coating (plastic) are generally called spray, the following explains the difference between spray paint and powder coating.1, Paint selection 1) Spray paint, paint containing fluorocarbon paint, acrylic paint, epoxy paint, polyurethane paint 2) Powder coating (plastic), the coating used is powder coating, commonly known as plastic powder.

  • Jun
    27
    Brief introduction about the powder recovery system

    There are two types of recovery system, one type is of single lever filter element recovery equipment (according to the recovery amount to choose the number of the filter element, about 2.4.6.8.10.15 etc )The filter element used by the filter recovery system is divided into common and lamination two

  • Jun
    27
    What is the material of the powder coating booth? Why use such material?

    Powder coating booth in general adopting engineering plastic, it including both PVC and PP. PVC usually applied in common powder coating booth, PP used in high-end quality powder coating booth. The engineering plastic has good insulating property, which is uneasy to accumulate the powder on the boot

  • Feb
    28
    What are the main equipments of a typical paint factory?

    The main equipments for painting include: water spray painting room; conveying system; hot air drying room 1. Water spinning spray room Water rotary spray paint room is also called hydraulic spinning type spray paint room. The chamber uses a gas laminar flow suppression method to prevent the paint m

  • Feb
    27
    Main factors affecting electrostatic powder coating

    There are many factors affecting electrostatic powder coating, such as equipment factors and operating factors. However, the main factors are powder conductivity, powder particle size, spray voltage, spray distance (between gun and workpiece), and supply pressure.1. Powder Conductivity: The volume o

  • Feb
    26
    The reason why the powder is not cured well in powder coating

    Considering from the powder coating, if the matching between the resin and the curing agent is unreasonable in the formulation design, for example, the reactivity selection of the resin or the selection of the type and amount of the curing agent is unreasonable; the mass percentage or the volume con

  • Feb
    25
    Matters needing attention during the process of electrostatic coating

    Spray voltage1.1 Within a certain range, the spray voltage increases and the amount of powder adhesion increases, but when the voltage exceeds 90KV, the amount of powder adhesion decreases with the increase of voltage.1.2 When the voltage increases, the initial growth rate of the powder layer increa

  • Feb
    20
    The difference between pinhole and shrinkage hole and its treatment method

    Pinholes and shrinkage cavities are common defects in the use of powder coatings. Their presence not only affects the appearance quality of the products, but also seriously affects the mechanical properties and protective properties of the products. Most of the corrosion of the materials to be prote

  • Feb
    19
    Automatic spray coating anti-cracking and anti-shock test instrument specifications

    Anti-cracking experimental instrumentThe automatic spraying coating anti-cracking experimental instrument is mainly used to test the crack resistance of the coating coating and the putty layer after drying, and observe the thickness of the crack after drying of the coating film to determine the crac

  • Nov
    30
    Effect of powder cleaning on the life of filter element in electrostatic spray equipment

    We all know that the filter element is an important part of the spray house powder recovery system. Its quality will directly affect the recovery effect of the electrostatic spray line. Therefore, whether the filter element can clean the filter cloth in time and effectively during use. The accumulat

Hebei Hanna  Technology  CO., LTD.

QUICK NAVIGATION

CONTACT US

Hebei Hanna Technology CO., LTD
 Shuguang road,Zhengding county,Shijiazhuang city,Hebei province,China
 +86-186 3213 8668  (Mark Lee)
 +86-311-85290395 
 +86-311-85290396
 [email protected]
 [email protected]
 © 2017 Hebei Hanna Technology CO., LTD. Support by Rongchuangmedia​. all rights reserved.    sitemap.xml