Provide the best powder coating system solution

Powder coating line

Hebei-Hanna-Powder-Coating-Equipment-Technology-Co,Ltd
Powder coating system manufacturer
You are here: Home » News

Recent News

Contact Us

Hebei Hanna Technology Co.,Ltd
 Economic and Technology Development Zone, Shijiazhuang city, Hebei Province, China
 +86-186 3213 8668  (Mark Lee)
 +86-311-85290395
 +86-311-85290396
 sales@coating-equipment.com
 sales@powderspraymachine.com

Paint Spraying Equipment

If you want to know more about the Paint Spraying Equipment, the following articles will give you some help. These news is the latest market situation, trend in development, or related tips of the Paint Spraying Equipment industry. More news about Paint Spraying Equipment, are being released. Follow us / contact us for more Paint Spraying Equipment information!
  • Jul
    05
    The Difference Between Powder Coating and Paint Spraying

    Spray paint and powder coating (plastic) are generally called spray, the following explains the difference between spray paint and powder coating.1, Paint selection 1) Spray paint, paint containing fluorocarbon paint, acrylic paint, epoxy paint, polyurethane paint 2) Powder coating (plastic), the coating used is powder coating, commonly known as plastic powder.

  • Oct
    22
    The advantages of electrostatic spraying are more

    Spraying machine brings a lot of convenience to our work. It is very important to know how to use this equipment correctly. Let us find out what problems should be noticed! 1. According to the size of the work object, the gun heads with different calibers can be used. Generally speaking, the spra

  • Sep
    20
    Countermeasures for Surface Shrinkage Defects in Spraying Process

    (1) high quality cold rolled sheet with thickness less than 1mmNo pinholes will appear after painting. If there is a crack, because there is air in the crack, coating solidification may cause coating interruption and discontinuity, that is, large pores;A porosity is caused by rust or dirt on the sur

  • Sep
    20
    Analysis of Surface Shrinkage Defects in Spraying Process

    The reason for the pinhole in the spray is related to the following points:1. The workpiece has a small amount of water or oil on the surface before spraying. When the temperature is solidified, the oil or water evaporates and vaporizes, leaving pinholes on the workpiece.2. If the pinholes are one p

Hebei Hanna  Technology  CO., LTD.

QUICK NAVIGATION

CONTACT US

Hebei Hanna Technology CO., LTD
 Shuguang road,Zhengding county,Shijiazhuang city,Hebei province,China
 +86-186 3213 8668  (Mark Lee)
 +86-311-85290395 
 +86-311-85290396
 sales@coating-equipment.com
 sales@powderspraymachine.com
 © 2020 Hebei Hanna Technology CO., LTD.  all rights reserved.    sitemap.xml   冀ICP备18001507号